Possess Sea Industrial Co., Ltd. - Drysuits Division
Professional Drysuit & Waders Manufacturer, Supplier and Exporter in China
  • Scuba Diving
Contact: Ms.Maggie, Mobile / WhatsApp: +86 138 168 15888, E-mail: maggie@wetsuit.asia

Drysuit Zipper Cleaner Lubricant - Supplier

We use a zipper care kit from the American manufacturer AQUASEAL®, including a zipper lubricant stick (Zip Tech) and a zipper cleaner and lubricant (Zip Care), for the lubrication of the waterproof zippers of drysuits, and to resist salt water, chlorine and rust damage to the zipper.

It is a very important maintenance item to clean and lubricate the waterproof zipper of the drysuit, which can effectively prolong the service life and use feeling of the waterproof zipper of the drysuit. But this is also a maintenance item that many divers don't pay much attention to. We often hear divers complain that zippers, especially metal tooth waterproof zippers like BDM, are very difficult to pull. By this time it was actually too late, and the waterproof zipper had been irreversibly damaged. Don't wait until you feel bad that it is no longer useful to do maintenance, regular and timely cleaning and lubrication maintenance is the correct way.

  • AQUASEAL® Drysuit Zipper Lubricant Stick (Zip Tech)
    Zipper Lubricant Stick-Zip Tech

Drysuit Zipper Lubricant Stick (Zip Tech)

Explain: AQUASEAL® zipper lubricant stick (Zip Tech) is a high performance zipper wax that is suitable for all water temperatures, does not peel easily, and contains no toxic chemicals or silicone.

Note: 4.5 g, single industrial packaging and double blister retail packaging.

  • AQUASEAL® Drysuit Zipper Cleaner and Lubricant (Zip Care)
    Zipper Cleaner and Lubricant-Zip Care

Drysuit Zipper Cleaner and Lubricant(Zip Care)

Explain: AQUASEAL® zipper cleaner and lubricant (Zip Care) has a brush head (removes sand and debris from zipper teeth) and creates a clear, protective and lubricating film (repels sand and dirt) after cleaning), contains no silicones or paraffins.

Note: 2 oz, blister retail packaging.

Drysuit Type:

Type Neoprene Drysuit Butyl Drysuit Breathable Drysuit
Material Neoprene Fabric Butyl Fabric Breathable Fabric
Process Glue & Blind Stitch + Glue Tape Flatlock Stitch + Glue Tape Flatlock Stitch + Hot Tape
Firmness Good Good Ordinary
Easy to Carry Not Good Ordinary Good
Thermal Insulation Good Little Little
Valve Inflation Valve, Exhaust Valve Inflation Valve, Exhaust Valve No or Dump Valve
Applications Diving Diving Water Sports, Rescue

Note: Breathable tri-laminate drysuit are not suitable for diving, but because of its light and low-cost characteristics, many brands have launched ultra-lightweight travel drysuit (equipped with inflation valve and exhaust valve) made based on breathable tri-laminate fabric, but it can generally only be used for diving at a depth of no more than 10 meters. In fact, there are also lightweight options for butyl tri-laminate fabric, but the price is more expensive than breathable tri-laminate fabric.

Drysuits Leaking and Maintenance Problems:

All our drysuits are tested for pressure leaks in a test pool before leaving the factory to ensure that the drysuits do not leak when shipped, but the harsh transportation environment (Abnormal collision and squeezing) and incorrect storage (abnormal squeezes) occasionally cause water leaks (rarely found).

Unless drysuits are rarely used, water leakage is practically impossible to avoid. Due to the use environment, strength, habits, matching, cleaning and storage methods and occasions, component life and aging and other factors, many drysuits are used after dozens to hundreds of times, it will happen water leaks.

Leaking does not mean that drysuits can no longer be used, most of the water leakage conditions can be repaired. We provide warranty services (quality problems) and repair services (use problems). Unless the aging material has no repair value, everything else can be repaired.

Under normal circumstances, common simple problems are recommended to customers to repair by themselves (such as small leaks, etc.) to save time and transportation costs. We have optional repair kits when we leave the factory, and various repair kits are also available on the market. If there is a big problem, it is recommended that the customer return to the factory for repair (for example: replacing the waterproof zipper, repairing a large break, etc.).