➜ Materials Division

Contact: Ms.Maggie, Mobile / WhatsApp: +86 138 168 15888, E-mail: maggie@wetsuit.asia

Surface Drysuit, Kayak Drysuit, Sailing Drysuit - Manufacturer and Supplier

We use breathable tri-laminate fabric to make surface drysuits, so that users can keep dry when participating in various water sports in cold weather and humid environment, which is very suitable for surfing, kayaking, canoeing, sailing, boating and other sports. Surface drysuit usually use high breathable fabric, the water pressure resistance is lower than that of amphibious drysuits and is not suitable for diving applications.

Surface drysuits are waterproof and breathable, but does not have thermal insulation performance, and users need to configure thermal undersuits. Usually we use the regular style of front zipper or back zipper, but if necessary, waist loop zipper can also be provided. Optional men's front urinal zipper and women's hip arc zipper make it more convenient to go to the toilet. If necessary, we can also be equipped with an dump valve to exhaust the air in the drysuits.

Breathable Tri-Laminate Surface Drysuit - DS31

Material: Breathable tri-laminate fabric, : 210D / 330D Nylon, middle layer: PU / PTFE, inner layer: 20D Tricot.

Process: "Stitch", single-thread or double-thread buried clip car to ensure the firmness of the seam. "Hot Tape", the seam use hot melt tape to ensure water resistance.

Neck / Wrists: Smooth skin seals (self-produce) / latex seals (UK).

Back Zip: The back uses YKK® AQUASEAL® / TIZIP® MasterSeal drysuit zipper.

Shoulders / Elbows / Knees: Optional Cordura® material reinforced.

Feet: Latex socks / Cordura® socks.

Breathable Tri-Laminate Surface Drysuit - DS32

Material: Breathable tri-laminate fabric, outer layer: 210D / 330D Nylon, middle layer: PU / PTFE, inner layer: 20D Tricot.

Process: "Stitch", single-thread or double-thread buried clip car to ensure the firmness of the seam. "Hot Tape", the seam use hot melt tape to ensure water resistance.

Neck / Wrists: Smooth skin seals (self-produce) / latex seals (UK).

Front Zip: YKK® AQUASEAL® / TIZIP® MasterSeal drysuit zipper on the chest.

Shoulders / Elbows / Knees: Optional Cordura® material reinforced.

Feet: Latex socks / Cordura® socks.

Breathable Tri-Laminate Fabric Type:

Outer Layer	210D Nylon	320D Nylon	330D Cordura®
Middle Layer	PU	PTFE	PU + PTFE
Inner Layer	20D Tricot

SGS Test Report (Breathable Tri-Laminate Fabric):

Breathable Tri-Laminate Fabric SGS Test Report

WB-C195-PU & PU SGS Test

Breathable Tri-Laminate Fabric SGS Test Report

WB-C330-PU SGS Test

Breathable Tri-Laminate Fabric SGS Test Report

WB-C330-PU & PTFE SGS Test

Description of SGS Test Products:
Usually, we use the American Standard ASTM E96/E96M method for moisture permeability test. This method specifies six test procedures. The test results obtained by different test procedures or even different versions of the same test procedure are very different. When comparing the performance indicators of related products, it is necessary to pay attention to the test program and version. The results of different programs and versions are not comparable.

Drysuit Type:

Type	Neoprene Drysuit	Butyl Drysuit	Breathable Drysuit
Material	Neoprene Fabric	Butyl Fabric	Breathable Fabric
Process	Glue & Blind Stitch + Glue Tape	Flatlock Stitch + Glue Tape	Flatlock Stitch + Hot Tape
Firmness	Good	Good	Ordinary
Easy to Carry	Not Good	Ordinary	Good
Thermal Insulation	Good	Little	Little
Valve	Inflation Valve, Exhaust Valve	Inflation Valve, Exhaust Valve	No or Dump Valve
Applications	Diving	Diving	Water Sports, Rescue

Note: Breathable tri-laminate drysuit are not suitable for diving, but because of its light and low-cost characteristics, many brands have launched ultra-lightweight travel drysuit (equipped with inflation valve and exhaust valve) made based on breathable tri-laminate fabric, but it can generally only be used for diving at a depth of no more than 10 meters. In fact, there are also lightweight options for butyl tri-laminate fabric, but the price is more expensive than breathable tri-laminate fabric.

Drysuits Leaking and Maintenance Problems:

All our drysuits are tested for pressure leaks in a test pool before leaving the factory to ensure that the drysuits do not leak when shipped, but the harsh transportation environment (Abnormal collision and squeezing) and incorrect storage (abnormal squeezes) occasionally cause water leaks (rarely found).

Unless drysuits are rarely used, water leakage is practically impossible to avoid. Due to the use environment, strength, habits, matching, cleaning and storage methods and occasions, component life and aging and other factors, many drysuits are used after dozens to hundreds of times, it will happen water leaks.

Leaking does not mean that drysuits can no longer be used, most of the water leakage conditions can be repaired. We provide warranty services (quality problems) and repair services (use problems). Unless the aging material has no repair value, everything else can be repaired.

Under normal circumstances, common simple problems are recommended to customers to repair by themselves (such as small leaks, etc.) to save time and transportation costs. We have optional repair kits when we leave the factory, and various repair kits are also available on the market. If there is a big problem, it is recommended that the customer return to the factory for repair (for example: replacing the waterproof zipper, repairing a large break, etc.).